Reference | Model | Power | Lumen | Measures | LED | IP |
---|---|---|---|---|---|---|
7730024 | Pico Lumina 8 RGB+W | 8 w | 982 | 245x32x10 mm | 7 white + 7 RGB | IPX7 |
7730026 | Pico Lumina 11 RGB+W | 11 w | 1471 | 315x32x10 mm | 14 white + 7 RGB | IPX7 |
The gooseneck support allows the luminaire to be adapted to all positions and to all types of aquariums.
It allows you to control the power of each channel, adjusting the light to the needs of the aquarium both in terms of power and color.
A thin layer of epoxy resin protects all the connections of the LED board so that nothing would happen if the luminaire accidentally fell into the water. At the same time, it allows the luminaire to be installed in places with high humidity. IPX7.
The secondary 90º lenses focus the light on the aquarium, no light is wasted in the surroundings of the aquarium, it increases the penetration of light and optimizes the wattage of the light.
RGB + technology consists of using RGB LEDs (three colors: red, green and blue in a single LED) and combining them with specific white LEDs in the case of the freshwater version and Royal Blue, Blue and violet in the marine version. .
The specific channel gives the necessary light power and the RGB LEDs allow the desired color tone to be given to the aquarium.
This technology improves the performance of luminaires that use RGBW (that is, LEDs with four colors in one, Red, Green, Blue and White) since having the white channel separated from the other three allows for more light power. It also improves the performance of those that use individual colored LEDs, since by having the three colors very close together, the mixture is much better, avoiding the multicolored effect or having to use a translucent cover that greatly reduces the intensity of the luminaire.
Pico Lumina RGB+W spectrum with all the channels at 100%
It allows to adjust the power and the optimal color for each aquarium.
The configuration will be saved and will be maintained even if the power goes out, the light is turned off or a timer is used.
It does not require any application to be able to regulate.